Snowblower Maintenance Tools

Snowblowers are pretty tough bits of kit. But even tough kit needs a little love. 

At the end of the season a good clean down will prevent salts attacking your metal work.

Adding a gas stabilizer will prevent carburetor gumming and guard against the corrosive effects of ethanol.

On this page you’ll find a list of tools, supplies, spare parts, videos, links to articles to help keep your blower in great shape.

Order parts direct from a diagram. MTD supply parts for many brands: Briggs & Stratton; Kohler; Tecumseh; Honda; Kawasaki; Troy-Bilt; Huskee; Yardman; Remington; Bolens; Yard Machines; Cub Cadet and a ton more too. Check out MTD’s easy order parts link below.

For Troy-Bilt machines check out Troy-Bilt parts direct.

For Cub Cadet machines check out Troy-Bilt parts direct.

Some of the pictures on this page link to Amazon.com where you can check price and delivery of productsWe are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.


Tough Cover

Keeping your kit covered makes a huge difference to the life of your machinery. When a Blower sits in the rain, moisture gets into everything, bearings, fasteners, electrical system, fuel system and moisture is the enemy.

The ToughCover is made from Marine grade water proof material. It's UV and mold resistant. Take it from a mechanic with years of experience, this cover will own you nothing. Picture links to Amazon.com


Snow Repellent

Non stick polymer formula helps prevent snow clogging and sticking to the chute and auger. A slippery chute means the snow fly's further with less effort, I like it! Picture links to Amazon.com

Tool set

Before we can do anything, we'll need tools. I've selected this set as I own some Craftsman tools and while I have broken them, they did do a lot of work. So I expect this set will last the occasional user quite a long time.

This set carries both metric and standard sockets and that's important, because some Blowers will have both type of fastener sizes. Picture links to Amazon.com


Roller Skid Shoes

Roller shoes are kinder to your drive surface and a ton easier to handle. These guys are heavy duty and are universal fit. Picture links to Amazon.com

Engine Oil

Briggs & Stratton 5W30 Synthetic engine oil, specially formulated for small engines and suitable for winter low temperature engine protection. This size is more than enough for an oil change. Picture links to Amazon.com

fueling system tools

A fueling system fault, hands down is one of the most common snowblower faults. The reasons are simple, carburetors are small and block up with crap easily.

The second reason, people (including me) forget to use a fuel stabilizer before storing the blower for summer. (Keeps gas fresh).

Cleaning the fueling system in most cases fixes the problem, Check this post out, “Carburetor cleaning”, but sometimes you’ll need to bite the bullet and fit a new carburetor.

Anyway, here’s a list of the tools you’ll find really helpful if your troubleshooting your fueling system.

Some of the pictures on this page link to Amazon.com where you can check price and delivery of productsWe are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.


Stabil Fuel stabilizer

Mix this with the gas when winterizing your small engine. Gas isn't what it used to be, it goes stale, in some cases after just one month. Bad gas causes gumming and that's a carburetor killer. Stabilizer will save you money and stress in the long run. Picture links to Amazon.com

Carburetor cleaner

When cleaning your carburetor you'll need this stuff. Gumming is a sticky substance that's hard to shift. The carb cleaner will remove it, however if your carb is really bad, save yourself some work, go ahead and buy a new carburetor. Picture links to Amazon.com

Oil extractor

You'll find this tool really useful if you need to drain the gas tank, and you will if the gas is stale. The siphon will remove it without fuss or mess and it can be used for extracting the oil too. Picture links to Amazon.com

Fuel line clamp

Some small engines will have a gas tap, which is really handy when removing the carburetor, stops gas flowing all over the shop. However most engines won't have one, these useful clamps simply squeeze the fuel line and prevent a spill while you perform surgery. Picture links to Amazon.com

Carburetor cleaners

You'll find these nylon brushes super useful when it comes time to clean those tiny passageways of the carburetor and jet. Use these in conjunction with the WD Carb cleaner. Picture links to Amazon.com

Ignition system tools

The ignition system of all small engines give plenty of trouble, after the fueling system it’s the next most likely area to fail. Checking for spark is often the very first test we do. Check out this post “How to check spark”.

Common problems include:

  • Plug dirty
  • Plug gap off
  • Armature/Coil failure
  • Broken flywheel key

The kind of tools we’ll need when working on an ignition system range from spark testing to measuring tools. I’ll list the most common tools together with what they do and a link to Amazon. 


Spark Tester

This tool is used to check both the spark plug and the coil for spark. Sure you can check the spark without the tool, but it's not as good, the tool is designed to stress the whole ignition system. Picture links to Amazon.com

Spark plug gapper

This tool isn't strictly necessary if you have a feeler gauge, but it's a lot easier to handle. If you haven't guessed, you use this tool to check the gap of your spark plug, simple effective tool. Picture links to Amazon.com

Fly wheel puller

Now this tool is a must have if you're removing the flywheel. Why would want to remove the flywheel? Sometimes the flywheel key shears, it stops your engine starting. The key is really cheap and it's easy to fix when you've got this tool. Picture links to Amazon.com

DVOM

Every home needs a Dvom (Digital Volt Ohm Meter). It's used to check for continuity in wiring, and for voltage when there's a battery fitted. But don't use this tool to check spark, that will kill it. I use mine everyday. I have the previous model to this and it's still doing its job. Picture links to Amazon.com

Jumper cables

I like the Cartman boosters, they stay flexible even in low temperatures. They have double grip clamps and the set is guaranteed for 5 years. Picture links to Amazon.com

Smart charger

This is a clever battery charger, plug it in, attach to your battery, and forget it. After it finishes charging, it trickle charges and it's safe to leave it on all winter. Picture links to Amazon.com. Picture links to Amazon.com

Testing Compression

If you’re reading this section, you might have a more serious problem. But it doesn’t mean you can’t fix it. Small engines are really simple, they need 3 things:

  • Gas/air mix
  • Spark
  • Compression

This tool will test compression, that in turn will help you identify common issues like head gasket failure, sticking valves or worn/broken piston rings.

Modern engines use a compression release valve which help them start. Trouble is, a compression release valve will give you incorrect compression test readings.

So if your engine was made in last 15 years or so, you’ll need the leak-down tester.

It allows you accurately measure pressure loss in the cylinder (you’ll need access to compressed air). But more importantly, it allows you listen for the tell tale leaking of air.

  • Air from the dipstick indicates a broken or worn rings.
  • Air leaking from exhaust/muffler suggests a exhaust valve issue.
  • Air leaking from carburetor suggests an intake valve fault.
  • Air from the cylinder head suggests a head gasket fault.

Compression tester

This is a compression tester, it's fitted in the plug hole using the adaptor. The engine is cranked over and a reading of how much compression the cylinder makes is captured on the gauge.

A low reading can be caused by a simple fault such as a sticking valve. Picture links to Amazon.com


Leak-down tester

The OTc is quality kit and will last many years of use. A leak-down tester will require compressed air. The tester measures how much air escapes a cylinder and helps you find weak rings, valves head gaskets etc. Picture links to Amazon.com

Feeler gauge

The ABN 26 blade feeler gauge set is marked in SAE and metric. You'll need this set to adjust valve lash and is useful when setting armature/coil air gap. You can also use it to gap spark plugs. Picture links to Amazon.com

Share


Auto Technician and Writer at Lawnmowerfixed | Website

John Cunningham is an Automotive Technician and writer on Lawnmowerfixed.com. I've been a mechanic for over twenty years, I use my knowledge and experience to write "How to" articles that help fellow gear-heads with all aspects of mechanical repairs, from lawn mowers to classic cars.